When using Professional Industrial Adhesive Tape, in order to ensure its optimal performance and extend its service life, you need to pay attention to the following aspects:
1. Storage conditions
Temperature and humidity: Professional Industrial Adhesive Tape should be stored in a dry environment with a temperature range of -15℃ to 40℃. Too high a temperature may cause the tape material to soften and lose its stickiness; while too low a temperature may make it hard and brittle.
Avoid contamination: The tape should be kept away from acid, alkali, oil, and organic solvents, which will corrode or damage the adhesive and substrate of the tape.
Storage method: The tape should be placed in a roll and avoid folding or twisting to maintain its flatness and stickiness. If stored for too long, it should be turned over once a season to prevent the tape from sticking or deforming.
2. Preparation before use
Clean the surface: Before using industrial tape, the surface of the adherend should be thoroughly cleaned to remove oil, dust and other impurities, and ensure that the surface is dry, smooth, and free of moisture and grease.
Choose the right tape: Choose the right type of tape according to the application requirements, such as heat-resistant tape, double-sided tape, etc., to ensure that the tape can meet the requirements of the specific environment.
3. Precautions when using
Correct lamination method: When laminating, ensure that the tape fits tightly to the surface of the adherend to avoid bubbles or wrinkles. You can apply a certain amount of pressure or use tools (such as rollers) to compact it.
Avoid overstretching: When stretching the tape, avoid overstretching to avoid deformation, loss of elasticity or reduced viscosity.
Timely replacement: If the tape is found to be damaged, reduced in viscosity or contaminated, it should be replaced with a new tape in time to ensure its normal operation.
4. Maintenance and care
Regular inspection: Regularly check the storage status and use of the tape to ensure that it is in good working condition.
Avoid direct sunlight: Long-term direct sunlight may cause the tape to age, discolor or lose viscosity.
In summary, when using Professional Industrial Adhesive Tape, you need to pay attention to storage conditions, preparation before use, precautions during use, and maintenance and care to ensure its optimal performance and extend its service life.